We, at Maruha added to the standard oil supplying type a new “no-lubricant-type” end-rod. This time we would like to introduce this tuning.
Stabilizer - end rod LSTD 2 pieces Code: mar04052124 For NA6CE NA8C NB Price: US＄119
Stabilizer - end rod LSTD 4 pieces Code: mar04052125 For NA6CE NA8C NB Price: US＄211
Stabilizer - end rod LSRT 2 pieces short-type Code: mar05021700 For NA6CE NA8C NB Price: US＄119
Stabilizer - end rod LSRT 4-pieces short-type Code: mar11061300 For NA6CE NA8C NB Price: US＄211
Stabilizer - end rod NSTD 2 pieces Code: mar11061310 For NA6CE NA8C NB Price: US＄119
Stabilizer - end rod NSTD 4 pieces Code: mar11061311 For NA6CE NA8C NB Price: 211
Stabilizer - end rod NSRT 2 pieces short type Code: mar11061320 For NA6CE NA8C NB Price: US＄119
Stabilizer - end rod NSRT 4 pieces short type Code: mar11061321 For NA6CE NA8C NB Price: US＄211
We recommend the oil supplying type which has higher load capacity compared to the no lubricant type.
A high performance molybdenum grease is included, which should be used on the pillow and spring at the setup.
Grease gun KH-120 Code: mar05030300 For pillow end Price: US＄42
Tube grease for grease gun Code: mar05030302 For pillow end Price: US＄７
Nozzle set (2 pieces) for grease gun Code: mar05030301 For pillow end Price: US＄40
The type without lubricant doesn’t need special tools for maintenance, that’s why it’s very convenient. Furthermore, grease is not being used in the inner, but a special suitable resin has been used for lubrication.
The genuine end rod for NA (control link) is set up on its both ends with rubber bushing, there’s an extreme transformation and the effect of the stabilizer reduces.
Furthermore if we lower the vehicle’s height, for securing in some range the stabilizer’s parallelism a whole height-adjustment type is necessary.
Distance between centers (genuine part): around 105mm
Maruha’s standard (LSTD/NSTD) adjustable range: around 100mm～120mm
Maruha’s short (LSRT/NSRT) adjustable range: around 65mm～80mm
The standard one is turnbuckle type set up through the duralumin body with a right bolt and a left bolt pillow.
Even after setting it up to the car, the length can be easily adjusted.
The nut is stainless steel.
The bolt with the polished nut is the one on the right and the unpolished bolt is on the left.
In the case of the short type, coupling has been carried out on the male and female screw’s pillow and compared to the genuine rod shortening becomes possible.
It is meant for users who want to lower the vehicle’s height.
Generally 4 standard collars and 1 thick collar, in total 5 collars are set up to one end-rod.
The thick collar is being used when adjusting the rod’s inclination in the case of setting an NB stabilizer to NA.
If you use Maruha’s pillow rod in NA, Mazda’s genuine bolt and nut will be reused.
Bolt stabilizer end-rod Code: 99784-1045 For NA6CE NA8C Price: US＄2
Nut for end-rod bolt Code: 99940-1000 For NA Price: US＄2
You can choose between the standard (LSTD/NSTD) and the short (LSRT/NSRT) type.
The genuine end-rod for NB is a ball-joint type that’s why unlike NA it doesn’t use bolts and nuts.
Distance between centers (genuine part): around 105mm
Maruha’s standard (LSTD/NSTD) adjustable range: around 100mm～120mm
Maruha’s short (LSRT/NSRT) adjustable range: around 65mm～80mm
If you use Maruha’s pillow-type rod for NB, you will need altogether 8 bolts and nuts (2 pieces each / rod).
Bolt stabilizer end-rod Code: 99784-1045 For NA6CE NA8C Price: US＄2
Nut for end-rod bolt Code: 99940-1000 For NA Price: US＄2
Home
Maruha Motors Co., Ltd.
Ushizuma 2095-6, Aoi-Ward
421- 2106 Shizuoka city, Shizuoka prefecture
Japan
TEL: 0081-54-294-0076
FAX: 0081-54-294-1312
E-mail: info@maruhamotors.co.jp